It shouldn't have...you were probably having "other" problems.
-bob
----- Original Message -----
From: "Mark Wauchope" <mark@ekiva.net>
To: <karlnet@WISPNotes.com>
Sent: Thursday, December 19, 2002 3:44 PM
Subject: RE: [Karlnet] AP-1000 Factory Reset
> I got it fixed on my own.
> I had not specified a route for the ethernet interface so the routing
table
> was incomplete. There was one route for one of the wirless interfaces so
I
> logged in via that wireless interface and fixed the routing table and now
> everything works.
>
> So tell me why a bad routing table would render the unit completely
> inaccessible even during a forced reload? Does that make any sense at
all?
> Oh I forgot, you are not my reseller so you won't answer that.
>
> --
> Mark Wauchope, Director of Engineering, Kivanet Inc
> 776 East Second Avenue Suite 207 Durango, CO 81301
> 970-749-2711 http://www.ekiva.net/ mark@ekiva.net
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com] On
> Behalf Of Charles Chia Sheng Wu
> Sent: Thursday, December 19, 2002 1:55 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] AP-1000 Factory Reset
>
>
> >Well I specifically said twice in my message that forced reload did not
> work
> >and I am trying to do factory reset. Forced reload does not revert to
> >factory flash and settings. But thanks anyway.
>
> ask your reseller...
>
> -Charles
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|