You know, that does make sense now that I think about it. I disabled
bridging on all the clients and made sure inhibit nat from 802.11b was
selected.
----- Original Message -----
From: "Nate McLain" <nate@ctrail.net>
To: <karlnet@WISPNotes.com>
Sent: Sunday, January 05, 2003 12:08 AM
Subject: RE: [Karlnet] Configurator ip confusion
> You are bridging your private IPs onto your network.
> You shouldn't have it enabled if you are enabling NAT.
> But like Charles said it is recommended that you use the radio interface
IP.
>
> Nate
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Brett Hays
> Sent: Saturday, January 04, 2003 10:37 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] Configurator ip confusion
>
>
> Actually, bridging is enabled, and I take it that is the problem.
>
> Brett
>
> ----- Original Message -----
> From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, January 04, 2003 9:45 PM
> Subject: RE: [Karlnet] Configurator ip confusion
>
>
> > is bridging disabled? check ARP tables
> >
> > also...it's recommended that you login to the unit via its outside
> interface
> > IP
> >
> > -Charles
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> > Behalf Of Brett Hays
> > Sent: Saturday, January 04, 2003 8:17 PM
> > To: Karlnet List
> > Cc: Kyle & Monica Stuckwish
> > Subject: [Karlnet] Configurator ip confusion
> >
> >
> > I am sure I am just missing something elementary, but I am having a lot
of
> > trouble with the latest configurator when doing installations.
> >
> > From our noc, the configurator works great. However, when we use it on
a
> > laptop to do link tests and aim in new cpe units for installs, it seems
to
> > get all mixed up on ip addresses. Here's what's happening.
> >
> > All of our cpe's (rg1100's running Karlnet) get a real world ip via dhcp
> > from the access point. They all run nat and dhcp on their ethernet
ports
> > and all have 10.0.1.1 as the ethernet ip. When I am at a customer site
> and
> > try to do a link test or open config on a unit I am plugged directly
into,
> > the configurator will open up a unit somewhere else on the network.
> >
> > How can I force the configurator to open config or link test on the
> directly
> > connected rg rather than another one on the net. This is really
confusion
> > as the numbers are non-routable and shouldn't be showing up beyond the
> radio
> > port anyway? I have heard of leaky NAT and I suppose that's what is
going
> > on here, but what can I do about it?
> >
> > Thanks for any help.
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|