pricing for the 1 port board - $150 w/out power supply or card
pricing for the 2 port board - $185 w/out power supply or card
offlist if you want to be put on the beta list
specs below...
Full Version WPAP+ / WPBASE+
SPECIFICATIONS
CPU ST-PC Elite @ 133MHz
BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
RAM 16MB on-board DRAM for programs and data.
Storage 512KB on-board Flash ROM (BIOS and
KarlNet firmware); Linear Flash support for factory loading.
Data Interface
PCMCIA / CARDBUS sockets
3.3/5V Selectable operations
10/100mbps Auto-sense Fast Ethernet
Power Input 9V to 15V DC in, either from the Input Jack, or Power over
Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
Standard. Power consumption ~9W fully loaded.
Second Ethernet port may be used as a PoE injector when DC power is applied
to first Ethernet Port.
Additional Features
Fully Industrial Strength Chipset
Reset / Reload Pushbutton Switches,
Hardware Watchdog Timer,
Programmable GPIO register for Input/Output,
FCC Class A Certification
Compact Flash Socket for Future Upgrades
Piezo Buzzer
Software control for header for external fan (voltage supply, 5 volt / 1 AMP
or sync current)
Speaker output header
LEDs for Board Power status, Link/ Activity for Ethernets & Link / Activity
for PCMCIA / Cardbus sockets
Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side major
component placement, the same basic mounting holes as the RG-1000.
Operating Temperature
-30° to 55° Celsius (° to 131° Fahrenheit) predicted temperature range,
with non-condensing humidity.
Lower cost Version WPCPE+
SPECIFICATIONS
CPU ST-PC Elite @ 133MHz
BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
RAM 16MB on-board DRAM for programs and data.
Storage 512KB on-board Flash ROM (BIOS and
KarlNet firmware); Linear Flash support for factory loading. Compact Flash
socket for future software upgrades.
Data Interface
PCMCIA / CARDBUS sockets
3.3/5V Selectable operations
10/100mbps Auto-sense Fast Ethernet
Power Input 9V to 15V DC in, either from the Input Jack, or Power over
Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
Standard. Power consumption ~9W fully loaded.
Additional Features
Fully Industrial rated Chipset
Reset / Reload Pushbutton Switches,
Hardware Watchdog Timer,
Programmable GPIO register for Input/Output,
FCC Class A Certification
Compact Flash Socket for Future Upgrades
Piezo Buzzer
Software control for header for external fan (voltage supply, 5 volt / 1 AMP
or sync current)
Speaker output header
LEDs for Board Power status, Link/ Activity for Ethernets & Link / Activity
for PCMCIA / Cardbus sockets
Form Factor 3.8" x 5.2" x .9" basic board size, with dual-side major
component placement, the same basic mounting holes as the RG-1000.
Operating Temperature
-30° to 55° Celsius (-22° to 131° Fahrenheit) predicted temperature range,
with non-condensing humidity.
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Bob Hrbek
Sent: Monday, January 20, 2003 11:32 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] New board
When, where, how much?
We've been told January, available from some vendors and that you weren't
sure what the price would be.
Come on guys....you are putting nails in your coffin here. We are
deploying
new sites....trying to decide what to do. Silence isn't helping you on our
list of pros and cons.......
-bob
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|