Karlnet
[Top] [All Lists]

Re: [Karlnet] PPPoE over KN bridged network with filtering

To: "Norm Young" <npyoung@applegatebroadband.net>, "Karlnet Mailing List" <karlnet@wispnotes.com>
Subject: Re: [Karlnet] PPPoE over KN bridged network with filtering
From: "Norm Young" <npyoung@applegatebroadband.net>
Reply-to: Norm Young <npyoung@applegatebroadband.net>, Karlnet Mailing List<karlnet@WISPNotes.com>
Date: Sat, 1 Mar 2003 22:10:46 -0800
List-post: <mailto:karlnet@WISPNotes.com>
Update.  Until it crashes several hours later.


----- Original Message -----
From: "Norm Young" <npyoung@applegatebroadband.net>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Saturday, March 01, 2003 6:18 PM
Subject: Re: [Karlnet] PPPoE over KN bridged network with filtering


Sergey,

I've found that if you pass all protocols under "Bridging" it will work.  It
will also work if you block all protocols but IP, IP-ARP, PPP, and 802.3
NetBUI.  For some strange reason, if you just allow all the previously
mentioned protocols, PPPoE does not work....

It's still not working great, I cannot "see" into the bridged network from
the wireless side---the AP hooked via the Ethernet to the RG-1100/SR-4000
w/bridging enabled, doesn't seem to like the RG, just looses communication
after a few minutes after boot up.  Meaning, you can't ping the AP---but
strangely enough, PPPoE seems to work!

Norm

----- Original Message -----
From: "Sergey Holod" <sss@radiocom.net.ua>
To: "Norm Young" <npyoung@applegatebroadband.net>; "Karlnet Mailing List"
<karlnet@WISPNotes.com>
Sent: Saturday, March 01, 2003 1:47 PM
Subject: Re: [Karlnet] PPPoE over KN bridged network with filtering


В сообщении от Среда 19 Февраль 2003 22:35 Norm Young написал:
> Anyone know what protocols you must pass before PPPoE will work over a KN
> bridged network?  Right now I'm passing IP and IP-ARP, and she's a no go.
> (Although it could be for a variety of other reasons....)

I wonder too..%)
I've tried to connect over PPPoE from freebsd and saw by tcpdump
that proto number - 8863..
But when I bridge it or bridge anything, it doesn't work again...

I don't see PPPoE "discovery" packets on wired interface of AP
It seems AP doesn't bridge them anyway...

--
With Best Regards,
Sergey Holod
SAH1-RIPE
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet



_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet



<Prev in Thread] Current Thread [Next in Thread>