Karlnet
[Top] [All Lists]

Re: [Karlnet] Intro

To: Karlnet Mailing List <karlnet@WISPNotes.com>
Subject: Re: [Karlnet] Intro
From: Leszek Olszewski <leszek@oslink.pl>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Mon, 03 Mar 2003 17:55:00 +0100
List-post: <mailto:karlnet@WISPNotes.com>
upgrade the prism card to 1.49 or 1.5 firmware and it'll show correct values.

Leszek

At 10:50 2003-03-03 -0600, you wrote:


> Both brands of the high-powered card are getting a lot warmer than your
typical Orinoco card.  We've solved the temperature problem very simply by
leaving covers off or adding a small fan in some cases.
>
> Signal information - Yes that's quite interesting... When you use the
configurator wireless link test all of the high-power cards except one,
shows believable values for Local SNR, signal, noise.  The Remote values are
always SNR 1, Signal -94, Noise -95  The exception to this is one high power
Zcomax card that shows believable values for both Local and Remote.  We have
no idea why this one card provides different results.  The important thing
is of course that it works...
>

So...which card is that?



_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>