I had almost the exact same problem, only my amber went amber and stayed
that way while I was onsite troubleshooting and then on about the 5th power
cycle, my AP wouldn't power up at all. After swapping out the power supply,
it has been running solidly for quite a number of months.
-Ben.
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> Sent: Monday, March 17, 2003 4:48 PM
> To: Karlnet List
> Cc: ISP Wireless List
> Subject: [Karlnet] AP1000, amber ethernet light, power supply?
>
>
> I had an AP1000 that died a couple of times today, when I went to
> the tower,
> it had an amber light on the ethernet. The first time I went, I
> just cycled
> the power and it came back online, but once a minute or so, you
> could see an
> amber flash in the ethernet light (during traffic).
>
> The second time it happened, I swapped out the power supply and
> now it seems
> to be normal and I am not seeing any amber flashes on ethernet at all.
>
> Does this sound familiar to anyone on the list? I just want to
> confirm that
> the power supply was the problem. Thanks!
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
|