I thought the latest and greatest Intersil firmware was supposed to solve
that problem?
Norm
----- Original Message -----
From: "Bob Hrbek" <bhrbek@jagwireless.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Saturday, May 03, 2003 7:28 PM
Subject: Re: [Karlnet] Prisim cards in AP-1000's
> I got it working. I didn't realize (at first) that the card FW was that
> important. I just installed the EnGenius card at a tower today. It isn't
> reporting noise and will only report signal strength if I do a signal
survey
> from the client.
>
> I really wish it would report noise. :(
>
> I updated the card to the latest...I think it was 1.7 something.
>
> -bob
> ----- Original Message -----
> From: "Caleb Carroll" <karlnet@pathcom.ca>
> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> Sent: Saturday, May 03, 2003 12:43 PM
> Subject: Re: [Karlnet] Prisim cards in AP-1000's
>
>
> > What Firmware did you upload to the AP-1000? I've only ever used
SA-4400.
> >
> > Was the EnGenius card in the AP-1000 when you uploaded the firmware to
the
> AP-1000? If so, upload the firmware without the EnGenius card in the
> AP-1000.
> >
> > Does the AP-1000 boot and work in TC mode with a regular Orinoco card?
> >
> > What firmware version do you have on the card? Anything better than
1.4.9
> or 1.5.6 should be fine. Have you tried another EnGenius card?
> >
> > *********** REPLY SEPARATOR ***********
> >
> > On 2003-May-02 at 9:32 PM Bob Hrbek wrote:
> >
> > >Well, I'm trying to use TC mode. The AP-1000 doesn't even boot up
> > >completely. I hangs with a red light on the PC led that the card is
> > >plugged
> > >in, regardless of slot A or B.
> > >
> > >It is an EnGenius 200mW card from Netgate.com
> > >
> > >Any thoughts?
> > >
> > >-bob
> > >----- Original Message -----
> > >From: "Leszek Olszewski" <leszek@oslink.pl>
> > >To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> > >Sent: Friday, May 02, 2003 3:45 PM
> > >Subject: Re: [Karlnet] Prisim cards in AP-1000's
> > >
> > >
> > >> They don't work in 802.11b mode, they only work in Turbocell mode.
> > >>
> > >> One of the bugs that supposedly don't exist.
> > >>
> > >> Leszek
> > >>
> > >>
> > >> At 15:13 2003-05-02 -0500, you wrote:
> > >> >I just ordered a few of the 200mW cards from netgate.com
> > >> >
> > >> >I stuck one in a 4.31 Karlnet AP-1000 and it won't boot with the
card
> > >> >inserted. Any ideas?
> > >> >
> > >> >I thought any Prisim 2 card worked.
> > >> >
> > >> >hmm
> > >> >
> > >> >_______________________________________________
> > >> >Karlnet mailing list
> > >> >Karlnet@WISPNotes.com
> > >> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>
> > >> _______________________________________________
> > >> Karlnet mailing list
> > >> Karlnet@WISPNotes.com
> > >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet