What are you using for Power supplies?
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]
> On Behalf Of Jimmy Valdes / jvaldes@detecsa.net
> Sent: Friday, June 13, 2003 1:13 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] Re: Karlnet Digest, Vol 6, Issue 16
>
> This kind of radios , works at 100mts with POE, all you
> need is a powerfull source power adaptor. at the limit
> 90-1mmmts you will need an power source adaptro with at
> last 20 volts and 2.5mA (3.2mA with an 1000mW Amp)i have
> this experience with arround 90 Links with this kind of
> radios in my country.
>
>
>
>
>
> On Fri, 13 Jun 2003 12:17:53 -0400
> karlnet-request@WISPNotes.com wrote:
> >*This message was transferred with a trial version of
> >CommuniGate(tm) Pro*
> >Send Karlnet mailing list submissions to
> > karlnet@WISPNotes.com
> >
> >To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >or, via email, send a message with subject or body 'help'
> >to
> > karlnet-request@WISPNotes.com
> >
> >You can reach the person managing the list at
> > karlnet-owner@WISPNotes.com
> >
> >When replying, please edit your Subject line so it is
> >more specific
> >than "Re: Contents of Karlnet digest..."
> >
> >
> >Today's Topics:
> >
> > 1. POE in the long run
> > 2. RE: POE in the long run (Dan Metcalf)
> > 3. Re: POE in the long run (Banda)
> > 4. Status of Ubicom software? (Norm Young)
> > 5. RE: POE in the long run (Charles Chia Sheng Wu)
> > 6. RE: POE in the long run (Dan Metcalf)
> >
> >
>
>----------------------------------------------------------------------
> >
> >Date: Thu, 12 Jun 2003 21:28:14 -0300
> >From: helio@compuland.com.br
> >To: karlnet@WISPNotes.com
> >Subject: [Karlnet] POE in the long run
> >Message-ID: <3EE8F06E.7497.2114F02@localhost>
> >Content-Type: text/plain; charset=US-ASCII
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7BIT
> >Precedence: list
> >Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> >Message: 1
> >
> >Hi:
> >
> > I'm trying to feed a WPCPE+ using POE. Tha cable
> >length
> >is 100 meters (the limit). How much should be the power
> >source ?
> >20Volts ? Using 12 volts is not enough to turn on the
> >CPE.
> >
> >Thanks,
> >Helio.-
> >CompuLand ISP Admin
> >GnuPG Public Key:
> >http://www.compuland.com.br/helio/gpgpublic.txt
> >
> >------------------------------
> >
> >Date: Thu, 12 Jun 2003 21:41:23 -0400
> >From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
> >To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> >Subject: RE: [Karlnet] POE in the long run
> >Message-ID: <000501c3314c$e6367530$02563342@wbsysnet1>
> >In-Reply-To: <3EE8F06E.7497.2114F02@localhost>
> >Content-Type: text/plain;
> > charset="US-ASCII"
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >Precedence: list
> >Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> >Message: 2
> >
> >When using POE w/ the WPCPE+, does the ETH1 port just
> >take the POE or do
> >you need to JUMP something to enable the POE function on
> >port ETH1?
> >
> >Also are 7/8 + and 4/5 -?
> >
> >> -----Original Message-----
> >> From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]
> >> On Behalf Of helio@compuland.com.br
> >> Sent: Thursday, June 12, 2003 8:28 PM
> >> To: karlnet@WISPNotes.com
> >> Subject: [Karlnet] POE in the long run
> >>
> >> Hi:
> >>
> >> I'm trying to feed a WPCPE+ using POE. Tha cable
> >>length
> >> is 100 meters (the limit). How much should be the power
> >>source ?
> >> 20Volts ? Using 12 volts is not enough to turn on the
> >>CPE.
> >>
> >> Thanks,
> >> Helio.-
> >> CompuLand ISP Admin
> >> GnuPG Public Key:
> >>http://www.compuland.com.br/helio/gpgpublic.txt
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> ---
> >> [This E-mail scanned for viruses by Declude Virus]
> >
> >
> >---
> >[This E-mail scanned for viruses by Declude Virus]
> >
> >------------------------------
> >
> >Date: Fri, 13 Jun 2003 10:07:26 +0200
> >From: "Banda" <abe@net.hr>
> >To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> >Subject: Re: [Karlnet] POE in the long run
> >Message-ID: <074201c33182$e818ba30$1945a8c0@vbanda>
> >References: <000501c3314c$e6367530$02563342@wbsysnet1>
> >Content-Type: text/plain;
> > charset="iso-8859-1"
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >Precedence: list
> >Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> >Message: 3
> >
> >> Also are 7/8 + and 4/5 -?
> >
> >this is only for cisco, the others are 4/5 + and 7/8 -
> >(or with wire colors:
> >blue +, brown -).
> >
> >
> >
> >
> >------------------------------
> >
> >Date: Fri, 13 Jun 2003 08:29:47 -0700
> >From: "Norm Young" <lists@applegatebroadband.net>
> >To: "Karlnet Mailing List" <karlnet@wispnotes.com>
> >Subject: [Karlnet] Status of Ubicom software?
> >Message-ID: <03ab01c331c0$a0e57520$6701a8c0@norms>
> >References: <000501c3314c$e6367530$02563342@wbsysnet1>
> > <074201c33182$e818ba30$1945a8c0@vbanda>
> >Content-Type: text/plain;
> > charset="iso-8859-1"
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >Precedence: list
> >Reply-To: Norm Young <npyoung@applegatebroadband.net>,
> >Karlnet Mailing List
> > <karlnet@WISPNotes.com>
> >Message: 4
> >
> >Whats the current status of the Ubicom software? Has
> >anyone tried this
> >setup? Any results? Charles, you said you had some of
> >these, but I don't
> >recall the pricing.
> >
> >Customer's need CPEs, and WISPs need this low cost
> >solution!
> >
> >
> >------------------------------
> >
> >Date: Fri, 13 Jun 2003 10:41:27 -0500
> >From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> >To: "Karlnet Mailing List" <karlnet@wispnotes.com>
> >Subject: RE: [Karlnet] POE in the long run
> >Message-ID: <NFEFKCBIHKKFPKEALKFJCEGFIGAA.cwu@cwlab.net>
> >In-Reply-To: <000501c3314c$e6367530$02563342@wbsysnet1>
> >Content-Type: text/plain;
> > charset="us-ascii"
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >Precedence: list
> >Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> >Message: 5
> >
> >just use a Motorola Canopy Power Supply - $10, and works
> >pretty good up to
> >about 200'
> >
> >-Charles
> >
> >-----Original Message-----
> >From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Dan
> >Metcalf
> >Sent: Thursday, June 12, 2003 8:41 PM
> >To: 'Karlnet Mailing List'
> >Subject: RE: [Karlnet] POE in the long run
> >
> >
> >When using POE w/ the WPCPE+, does the ETH1 port just
> >take the POE or do
> >you need to JUMP something to enable the POE function on
> >port ETH1?
> >
> >Also are 7/8 + and 4/5 -?
> >
> >> -----Original Message-----
> >> From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]
> >> On Behalf Of helio@compuland.com.br
> >> Sent: Thursday, June 12, 2003 8:28 PM
> >> To: karlnet@WISPNotes.com
> >> Subject: [Karlnet] POE in the long run
> >>
> >> Hi:
> >>
> >> I'm trying to feed a WPCPE+ using POE. Tha cable
> >>length
> >> is 100 meters (the limit). How much should be the power
> >>source ?
> >> 20Volts ? Using 12 volts is not enough to turn on the
> >>CPE.
> >>
> >> Thanks,
> >> Helio.-
> >> CompuLand ISP Admin
> >> GnuPG Public Key:
> >>http://www.compuland.com.br/helio/gpgpublic.txt
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> ---
> >> [This E-mail scanned for viruses by Declude Virus]
> >
> >
> >---
> >[This E-mail scanned for viruses by Declude Virus]
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >------------------------------
> >
> >Date: Fri, 13 Jun 2003 11:47:52 -0400
> >From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
> >To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> >Subject: RE: [Karlnet] POE in the long run
> >Message-ID: <005401c331c3$268c79b0$02563342@wbsysnet1>
> >In-Reply-To: <NFEFKCBIHKKFPKEALKFJCEGFIGAA.cwu@cwlab.net>
> >Content-Type: text/plain;
> > charset="us-ascii"
> >MIME-Version: 1.0
> >Content-Transfer-Encoding: 7bit
> >Precedence: list
> >Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> >Message: 6
> >
> >Isn't that 24volts though? Will that cook the unit?
> >
> >> -----Original Message-----
> >> From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]
> >> On Behalf Of Charles Chia Sheng Wu
> >> Sent: Friday, June 13, 2003 11:41 AM
> >> To: Karlnet Mailing List
> >> Subject: RE: [Karlnet] POE in the long run
> >>
> >> just use a Motorola Canopy Power Supply - $10, and works
> >>pretty good
> >up to
> >> about 200'
> >>
> >> -Charles
> >>
> >> -----Original Message-----
> >> From: karlnet-bounces@WISPNotes.com
> >> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Dan
> >>Metcalf
> >> Sent: Thursday, June 12, 2003 8:41 PM
> >> To: 'Karlnet Mailing List'
> >> Subject: RE: [Karlnet] POE in the long run
> >>
> >>
> >> When using POE w/ the WPCPE+, does the ETH1 port just
> >>take the POE or
> >do
> >> you need to JUMP something to enable the POE function on
> >>port ETH1?
> >>
> >> Also are 7/8 + and 4/5 -?
> >>
> >> > -----Original Message-----
> >> > From: karlnet-bounces@WISPNotes.com
> >> [mailto:karlnet-bounces@WISPNotes.com]
> >> > On Behalf Of helio@compuland.com.br
> >> > Sent: Thursday, June 12, 2003 8:28 PM
> >> > To: karlnet@WISPNotes.com
> >> > Subject: [Karlnet] POE in the long run
> >> >
> >> > Hi:
> >> >
> >> > I'm trying to feed a WPCPE+ using POE. Tha cable
> >>length
> >> > is 100 meters (the limit). How much should be the
> >>power source ?
> >> > 20Volts ? Using 12 volts is not enough to turn on the
> >>CPE.
> >> >
> >> > Thanks,
> >> > Helio.-
> >> > CompuLand ISP Admin
> >> > GnuPG Public Key:
> >>http://www.compuland.com.br/helio/gpgpublic.txt
> >> >
> >> > _______________________________________________
> >> > Karlnet mailing list
> >> > Karlnet@WISPNotes.com
> >> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> > ---
> >> > [This E-mail scanned for viruses by Declude Virus]
> >>
> >>
> >> ---
> >> [This E-mail scanned for viruses by Declude Virus]
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> ---
> >> [This E-mail scanned for viruses by Declude Virus]
> >
> >
> >---
> >[This E-mail scanned for viruses by Declude Virus]
> >
> >------------------------------
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >End of Karlnet Digest, Vol 6, Issue 16
> >**************************************
>
> _________________________
> Jimmy Valdes G.
> Jefe de red Externa
> jvaldes@detecsa.net
> Detec S.A - Desarrollos Tecnologicos S.A.
> www.detecsa.net
> PBX: 6641079
> Colombia - South America
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]
---
[This E-mail scanned for viruses by Declude Virus]
|