You might try the Ubicom 19dB CPEs from MapleNet. So far I'm pretty happy
with them. Just bridges, and need some work on the firmware, but definately
headed in the right direction, and right around $300/unit.
Norm
----- Original Message -----
From: "Linuxwhat" <linux@kolb.net>
To: "karlnet" <karlnet@WISPNotes.com>
Sent: Wednesday, July 23, 2003 8:19 PM
Subject: [Karlnet] AP hardware for Karlnet
Hello,
We have been testing Karlnet for a few months with great sucess. We have 2
Ptmp and 2 Ptp links up and we are very happy with the performance and
reliablity. We also are testing Motorola canopy. Works well but very pricy.
Up to this point we have used Orinoco ap-1000's and gr-1000's with sivler
cards and some Seneo 200mw cards. We are getting ready to begin general
deployment are wanted to get suggentions on cpe equipment the works as well
as rg's but will help to lower cost. I am interested in self contained in
antenna units as well as typical antenna coax to ap.
Thanks for your help.
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|