I am using them on both. In the Ap-1000 I 2 cards installed but just 1
Seneo. They have been running 24x7 for about 60 days with out a hitch. The
local recieve RF stats are not correct when the Seneo is used. Per Karlnet
this is a bug in the cards chip set. To work around this you just log into
the reote unit and check from that side.
tom
---- Original Message -----
From: "Bruno Lopes F. Cabral" <bruno@openline.com.br>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Thursday, July 24, 2003 5:26 AM
Subject: Re: [Karlnet] AP hardware for Karlnet
> Hi there
>
> Are you using Senao 200mW cards on AP1000 and RG1000s?
> do you change the power supplies or anything like that?
>
> I remember reading on this list that nor AP1000 nor RG1000 would
> be up to the power drain of 100/200mW cards...
>
> Cheers
> !3runo
> from Brazil
>
> > Up to this point we have used Orinoco ap-1000's and gr-1000's with
sivler
> > cards and some Seneo 200mw cards.
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
|