I would think you need to select ISP Base Station with protocol filtering on
the AP1000's and then filter out netbios.
----- Original Message -----
From: "Robert Farrar" <robert@secnet.net.au>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Saturday, July 26, 2003 4:00 AM
Subject: [Karlnet] Karlnet ubicom CPE access points
> We have a bit of a problem & would like to ask a question to the list to
see
> if we can sort this out.
>
> We are using both a mix of soho 1 & 5, ndis clients & ubicom CPE and all
are
> just bridging to AP-1000 ispbase stations now the problem we now have
since
> the ubicom's have been added to the network is that the channel & network
ID
> must be the set to the same (before we just had network ID set to 0) on
the
> base stations so that the ubicom's can talk to them thats fine so we now
> must change all the soho & ndis clients to match as well.
>
> The problem is that now if a client is running windows 98, xp etc they are
> able to see each others network by browsing with Network Neighborhood, now
> its easy to fix by stop sharing your drive, but what if its a business and
> they need the drive shared over there internal network ?
>
> Any ideas at all ?
>
> Regards,
>
> Robert Farrar
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|