Laroy,
I did get a response today.
The KN-200 should be able to support 2 200mw cards. Only possible issue
is it will generate more heat! So make sure you use an enclosure that
provides a way to help cool the board.
Kevin
**************************************
Kevin R. Knuth
Business Development Manager
North America
260-424-9690 Regional Office
614-822-5275 Corporate Office
kknuth@karlnet.com
www.karlnet.com
**************************************
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of LaRoy McCann
Sent: Tuesday, November 04, 2003 4:15 PM
To: Karlnet Mailing List
Subject: UPDATE: [Karlnet] KN200 Problems
Kevin and anyone interested,
The problem I described yesterday with the kn200 boards has been
partially
resolved.
The p2p link between the satellite units was due to the remote sat power
supply being nocked loose from the power strip. (That will do it every
time)
I still have to figure out the problem with the kn100 soho and the kn200
satellite not seeing each other, but the units power up and each unit
can
be accessed at each location. Guess I will have to make a field trip on
this one.
Kevin, did you here anything back from engineering on the power
requirements for the kn200 with two 200mw cards?
LaRoy McCann
|