use the KN-100 boards?
usually, it's a sign of not enough power at the RG (since the power draw of
the prism cards is higher) - how are you powering the RG? Poe? or the wall
wart
-Charles
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Michael McDermott
Sent: Wednesday, November 19, 2003 12:18 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] RG-1100 Problems with High Powered Cards
I'm currently having problems with 100/200mw Senao cards in RG-1100
devices. The RG-1100 device will not totally boot up with the 200mw card
(freezes half way thru the boot up process), but will boot up and work with
low power cards (Orinoco cards). Any ideas?
TC firmware is SR-4200 using knscotcn-v4.43k.bin
Michael R McDermott BEng (Comp. Eng.), MACS, IEEE
Pre-Sales Technical Consultant
Veritech Australia Pty Ltd
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|