This is a "used bin file" problem.
Try to download a new bin file and to upload this file to device.
Best regards,
Nelu Dumitru
-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of Bruno Lopes F. Cabral
Sent: Thursday, November 20, 2003 3:21 PM
To: karlnet@wispnotes.com
Subject: [Karlnet] problems with SATELITE on WP-II
Hello there
I'm trying to help a friend install a karlnet satelite
license on a WP-II
for some reason, the unit locks up after installing the firmware (load
kernel, import license key file, upload software, it appears to finish then
hang with all leds RED). yes, the license was generated for this unit (the
macaddress is OK) -- I've seen this when the license
was wrongly generated or was for the wrong device, which sometimes happen
when you have more than one AP ;^)
one thing I found interesting is that, when we try to
upload back WPNT351.bin (WP-II latest firmware) with
Karlnet Configurator, it doesn't work
when we do the same procedure using AP MANAGER, it upload
first the WPNTFIX.bin, _then_ it uploads WPNT351.bin.
in both cases we choose through the menus the same file
(WPNT351.bin)
is Karlnet Configurator able to do this upload? if so, how?
is there any known problem between karlnet firmware 4.31
and WP-II? (we also tried 4.43k with no luck either)
any help on this would be greatelly appreciated
Cheers
!3runo
from Brazil
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|