Karlnet
[Top] [All Lists]

Re: [Karlnet] Ubicom woes

To: Mailing List <karlnet@WISPNotes.com>
Subject: Re: [Karlnet] Ubicom woes
From: "dan.metcalf" <dan.metcalf@wbsysnet.com>
Reply-to: dan.metcalf@wbsysnet.com,Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Fri, 12 Dec 2003 11:01:26 -0600
List-post: <mailto:karlnet@WISPNotes.com>
norm,

the kn50 panel is available, $299 contact me off list

dan


---------- Original Message ----------------------------------
From: "Norm Young" <lists@applegatebroadband.net>
Reply-To: Norm Young <lists@applegatebroadband.net>,Karlnet Mailing List 
<karlnet@WISPNotes.com>
Date:  Fri, 12 Dec 2003 08:57:13 -0800

>Hi Charles, hows that KN-50/19dB panel CPE coming?
>
>Norm
>
>----- Original Message ----- 
>From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
>To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
>Sent: Friday, December 12, 2003 7:48 AM
>Subject: RE: [Karlnet] Ubicom woes
>
>
>> you need the locator - check email offlist
>>
>> -Charles
>>
>> -----Original Message-----
>> From: karlnet-bounces@WISPNotes.com
>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Ben Polson
>> Sent: Friday, December 12, 2003 8:54 AM
>> To: Karlnet Mailing List
>> Subject: [Karlnet] Ubicom woes
>>
>>
>> Hello List.  Well, I've tried now for about 30 minutes to figure out how
>to
>> connect to the Ubicom I purchased recently, but am thus far unsuccessful.
>I
>> have tried setting my PC's IP to 192.168.1.10/24, 192.168.2.10/24,
>> 192.168.255.10/24, and 10.0.1.10/24.  I am using the "Wireless Navigator"
>to
>> try and scan for it, and have no firewall software on this PC.  I have
>also
>> tried using an IE browser to connect manually to the 192.168.1.100 address
>> that seems to be listed in the tiny document that came with the Ubicom
>> device.  I do have link on both the PC and the Ubicom and have verified
>the
>> cables and network ports on the hub and PC are good.  Google didn't have
>any
>> answers for me either.
>>
>> I even became desperate enough to try the Configurator, knowing full well
>> that the Ubicom is not an SNMP device...  :)
>>
>> Any suggestions?  There are no "Reset to Factory Default" instructions in
>> the document either.  Thanks in advance!
>>
>> -Ben.
>>
>> _______________________________________________
>> Karlnet mailing list
>> Karlnet@WISPNotes.com
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>> _______________________________________________
>> Karlnet mailing list
>> Karlnet@WISPNotes.com
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
>-- 
>[This E-mail scanned for viruses by Declude Virus]
>
>
-- 
[This E-mail scanned for viruses by Declude Virus]

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Karlnet] Ubicom woes, dan.metcalf <=