Karlnet
[Top] [All Lists]

RE: [Karlnet] max temp on kn-205

To: admin@mail.warpspeedinternet.ws,"Karlnet Mailing List" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] max temp on kn-205
From: "Caleb Carroll" <karlnet@pathcom.ca>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Thu, 22 Jul 2004 16:34:07 -0600
List-post: <mailto:karlnet@WISPNotes.com>
I finally managed to fix some of the bugs in the Karlnet SNMP MIB that allowed 
me to start recording temperatures on KN-105's & 205's  I was interested in 
doing this to determine if the temperature was a factor in occasionally losing 
comunication with them.  I haven't come to any conclusions yet but I've seen 
one site with a temperature as high as 75C in the afternoon - it seemed to be 
operating fine.

see some of the graphs: https://carroll.pathcom.ca/karlnet/graphs


*********** REPLY SEPARATOR  ***********

On 2004-07-22 at 2:41 PM admin wrote:

>55C or 130F is the max i believe. Mine has reached within a degree of
>that without reboots.
>Eric
>---------- Original Message ----------------------------------
>From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
>Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
>Date:  Thu, 22 Jul 2004 17:30:55 -0400
>
>>I have a kn-205 in service using 30mw lucent radio's, the temperature
>>reading says +123*F, does it go any higher than that? the unit seems to
>>have rebooted several times while recording that tempature?
>>
>>
>>
>>
>>--
>>[This E-mail scanned for viruses by Declude Virus]
>>
>>_______________________________________________
>>Karlnet mailing list
>>Karlnet@WISPNotes.com
>>http://lists.wispnotes.com/mailman/listinfo/karlnet
>>
>
>--
>Eric L. Johnson
>WarpSpeed Internet
>1-361-563-3742
>--
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet



_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>