What's the least expensive way to do a short point to point w/ Turbocell?
We are deploying some AP's on grain elevators and need to serve the buildings
at the grain elevators which are about 75-100 yards away from the elevator with
no good way to run cat5. The ap's are going to be 900Mhz, but I hate to use a
900Mhz SU to serve the elevator building less than 300 feet away in plain los.
We use turbocell exclusively in our network (for 2.4) and don't want to use
native 802.11b mode equipment.
So, what's the cheapest thing to use to make that link w/ turbocell? What's
the least expensive way to do this? Two ap500's (one in base, other in
satellite? One ap500, one KN50?)
I have done mostly point to multipoint with AP1000,KN200 and Flashrom, so this
is something I haven't dealt with before.
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|