You could get 2 rg1000s (ap500's) (or kn105's would be my choice) and do
a PTP shot, don't forget about the MAC LIMIT though on some bins.. you
could just put a router between the rg1000 and the 900mhz AP and not
worry about the MAC limit
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On
> Behalf Of Brett Hays
> Sent: Monday, July 26, 2004 1:15 PM
> To: Karlnet Mailing List
> Subject: [Karlnet] least expensive turbocell p2p?
>
> What's the least expensive way to do a short point to point w/
Turbocell?
>
> We are deploying some AP's on grain elevators and need to serve the
buildings
> at the grain elevators which are about 75-100 yards away from the
elevator
> with no good way to run cat5. The ap's are going to be 900Mhz, but I
hate to
> use a 900Mhz SU to serve the elevator building less than 300 feet away
in
> plain los. We use turbocell exclusively in our network (for 2.4) and
don't
> want to use native 802.11b mode equipment.
>
> So, what's the cheapest thing to use to make that link w/ turbocell?
What's
> the least expensive way to do this? Two ap500's (one in base, other
in
> satellite? One ap500, one KN50?)
>
> I have done mostly point to multipoint with AP1000,KN200 and Flashrom,
so this
> is something I haven't dealt with before.
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> --
> [This E-mail scanned for viruses by Declude Virus]
>
--
[This E-mail scanned for viruses by Declude Virus]
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|