Greg Clark wrote:
> Tad
>
> I've seen this when the keyer has no message recorded for the specifed
> message. Did you record a message under NA or are you relying on the
> DVRC setup?? I would suggest that you record under NA and then see what
> happens.
Thanks for the suggestion. When I try to record from NA using "Shift+F1", the
message in the bottom left of the screen says "Contest Card not ready to
record". I guess this is the problem, but any ideas on how to correct it?
> Also, make sure you specify W9XT card in the voice keyer area....not one
> of the other choices.
>
> 73/Greg
> K9IG
I verified that W9XT is selected.
> Tad Danley, K3TD wrote:
> >
> > Need some help, please !
> >
> > Installed the W9XT card in my pc and set it up using the DVRC program to
> > identify the LPT port (#2) and program the four messages. It works
> > great and keys the transmitter fine.
> >
> > Then I configured NA 10.35 and told it I have the W9XT card and that it
> > is on LPT2. I went to the EQUIPMENT screen and told NA a DVK was
> > installed, and the status bar indicates "VoiceKeyer ON". When I hit F1,
> > the bottom left of the screen displays "VoiceKeyer Message 1" for a few
> > seconds, but the rig does not key.
> >
> > Any help will be greatly appreciated - THANKS and 73,
> > --
> > Tad Danley, K3TD
--
Tad Danley, K3TD
mailto:tadanley@mindspring.com
TRA 4501, TARA 18, NAR 14020
For amateur radio contesting try http://www.contesting.com
For high power rocketry try http://www.rocketryonline.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|