"David A. Pruett" wrote:
> Tad,
>
> Glad to help out. Its really not too bad if you have the right
> information.
>
> Your last message made sense. If I recall, you said the W9XT card ran fine
> using DVRC, and I'm assuming it is set for LPT2? Gary's FINDLPTS says LPT1
> is 278. You should set the NA DVK port for LPT1 and it SHOULD run fine.
>
> The fact that DVRC worked OK set for 278, NA should be fine also. The BIOS
> says LPT1 is 278, so tell NA to use LPT1.
>
> Drop me another note if this does not work.
>
> 73,
>
> Dave
MANY THANKS to all who offered help, especially K8CC, W9XT, and KF4MZD who set
the BIOS so that LPT1 is at 3BC, allowing LPT2 to be at 278 for the contest
card.
Everything is now working fine thanks to your help!
73,
--
Tad Danley, K3TD
mailto:tadanley@mindspring.com
TRA 4501, TARA 18, NAR 14020
For amateur radio contesting try http://www.contesting.com
For high power rocketry try http://www.rocketryonline.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|