Same thing happens here, Jim. I have to turn on VOX and set delay for zero
to make it work OK.
73, Ty K3MM
Please respond to Jim Pratt <n6ig@netcom.com>
To: na-user@contesting.com
cc: (bcc: Tyler G Stewart/BENN/CEC)
Subject: [na-user] CW PTT and FT1000MP
OK, I am trying to implement NA for the Sprint. Purchased V 10.35 and
have it running pretty well, despite unexplained COM port problems I have
never experienced with CT or TR. BUT...
I decided to implement the CW PTT function. The PTT comes out of the
same LPT port as the CW keying output and the paddle input. On computer
one in the network, connected to an FT1000D, all is FB. On the second
computer, connected to an FT1000MP, the first dit or dah is cut off,
whether sending from the computer memory or the paddle. I don't seem to
see any sort of variable to fix this. If you turn on the VOX, all is OK
(but of course the purpose of the PTT function is to eliminate the use of
VOX).
Any suggestions (other than turning on the VOX on the 'MP?).
73, Jim N6IG
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|