Hi John,
No, nothing different. I have always run NA in a window. It has always
worked fine, until now. I am going to try to run it in DOS and see what
happens. I know everything else is working ok, since I can run TR in DOS
and it communicates just fine with both the TNC and the radio. I just made
sure of that tonight. I'll let you know.
Jim W4LC
----- Original Message -----
From: John K Bednar <jkbe@lucent.com>
To: w4lc <w4lc@fuse.net>
Sent: Monday, March 13, 2000 15:02 PM
Subject: Re: [na-user] Packet Problems
>
>
> Jim,
>
> Is there something different in how you are running NA?
> Maybe running from Windows Dos instead of a clean boot into
> DOS.
>
> The TNC will send data to the computer on powerup. You
> can use that trick to force data to flow to the computer.
>
> Let us all know what you find.
>
> John, K3CT
> jkbe@lucent.com
>
>
> w4lc wrote:
> >
> > Hi Jamie,
> >
> > I have checked that, and the KAM is in Terminal Mode. I also downloaded
a
> > new copy of v10.45 and reinstalled it. But no luck.
> >
> > Thanks
> > ----- Original Message -----
> > From: Jamie Tolbert <jtolbert@gremlan.org>
> > To: w4lc <w4lc@fuse.net>; <na-user@contesting.com>
> > Sent: Saturday, March 11, 2000 18:46 PM
> > Subject: Re: [na-user] Packet Problems
> >
> > >
> > > May seem silly but make sure the KAM is not in host mode....if you use
> > > another program (KAGOLD, HOSTMASTER, etc) it may leave the tnc in host
> > mode
> > > when you exit.
> > >
> > > 73 Jamie WW3S
> > >
> > > -----Original Message-----
> > > From: w4lc <w4lc@fuse.net>
> > > To: na-user@contesting.com <na-user@contesting.com>
To: <na-user@contesting.com>
> > > Date: Saturday, March 11, 2000 7:27 AM
> > > Subject: [na-user] Packet Problems
> > >
> > >
> > > >
> > > >I need some help from the relectorees.
> > > >
> > > >My NA (v10.45) no longer communicates with my TNC. It used to work
> > fine.
> > > >No longer. However, it still communicates with my radio ok. I have a
KAM
> > > >Plus on COM1 and a TS850 on COM2.
> > > >
> > > >The settings still look ok:
> > > >
> > > >COM1 4800 baud IRQ 4
> > > >COM2 4800 baud IRQ 3
> > > >Xcvr: Kenwood1
> > > >TNC Type: Local
> > > >
> > > >I have the TNC and radio selected in the equipment screen. I also
have
> > > >packet spots enabled. However, the program does not receive ANY
packets
> > in
> > > >the packet screen. It also will not send a command to the TNC. The
TNC
> > is
> > > >working fine since I can send and receive packets with a couple of
other
> > > >programs.
> > > >
> > > >I have corresponded with K8CC. He suggested a couple of things which
I
> > > >tried, i.e. testing the comport by shorting pins 2 and 3, then typing
a
> > > line
> > > >into the packet window. This echoed back, indicating the comport and
> > > >program are working together ok. Also checking the KAM to assure
that
> > the
> > > >baud rate is the same as NA is set for. They both are set for 4800,
so
> > > this
> > > >is ok.
> > > >
> > > >Any ideas appreciated.
> > > >
> > > >Jim W4LC
> > >
>
> --
> John Bednar
> jkbe@lucent.com
> Office: (610)-712-6146
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|