NA-User
[Top] [All Lists]

[na-user] NA network

To: <na-user@contesting.com>
Subject: [na-user] NA network
From: Joe <w0joe@tabby.cooldude.com> (Joe)
Date: Tue, 14 Nov 2000 07:20:05 -0600 (CST)

I'm working on a six station NA network that will be fed packet data.  I
am using K1TTT routing program.   Got that figured out.   Should I feed
the data to one of the logging stations direct or should I feed it back
into the computer pulling the packet data and include it in the NA
network?   

That is should I run NA on the packet data acquisition computer
pump the packet data out com1 back into com2, then setup a com3 to connect
to the NA serial network?   (com1=k1ttt port, com2=tnc, com3=na network)

Or just put 3 com ports into one of the logging machines and feed it the
packet data?   (com1=radio interface, com2=na network, com3=TNC port,
lpt1=cw interface)


73, W0JOE


--
Submissions:              na-user@contesting.com
Administrative requests:  na-user-REQUEST@contesting.com
WWW:                      http://datom.contesting.com/
Questions:                owner-na-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>