> about heat on the front panel) are well clear
> of obstructions, is there any need to worry about
> clearance on the cabinet slots? Does anyone have
> any experience with this?
There is no real problem with heat on the front panel. No more so
than any other device chock full of power dissipating electronics,
and any other radio you might own. Run RTTY at full output for a
few hours solid and of course it will get warm. Much of the gear (the
Orion being the ONLY exception) in my shack is loaded with those
antique vacuum bottles, so on a relative basis the Orion is as cool
as the proverbial cucumber :-)
There are vent slots at the front of the box, and at the rear. if you
want to stack other stuff on top, there's plenty of clear area to do
that in between.
This whole "heat problem" thing is the stuff of urban ... er .. internet
legends ...
Grant/NQ5T
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|