| To: | ditsnbits@tentec.com, orion@contesting.com, sales@tentec.com | 
|---|---|
| Subject: | [Orion] Orion CW Keying - Minor glitches | 
| From: | "Charles W. Shaw" <chas.shaw@verizon.net> | 
| Date: | Mon, 15 Dec 2003 01:52:03 +0000 | 
| List-post: | <mailto:orion@contesting.com> | 
| 
This may have been reported before and I failed to see it. Noted during the ARRL 10M Test (CW Only): Using computer generated CW input via the rear panel CW key jack (79) and also by using the front panel Send buttons --if either the "Cut" encoder or the "PBT/BW" encoder are adjusted while CW is being transmitted, the CW speed and inter-character/character spacing is affected. It is not a severe thing but certainly noticeable, especially at contest CW speeds. Sometimes it is convenient to narrow the BW while sending a report in anticipation of probable difficulty in copying a report back from a weak station, etc. Charles Shaw - N5UL Hobbs, NM _______________________________________________ Orion mailing list Orion@contesting.com http://lists.contesting.com/mailman/listinfo/orion  | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
  | ||
| Previous by Date: | [Orion] Re: [orion565] Deaf Orion, john, ke5c | 
|---|---|
| Next by Date: | [Orion] Orion CW Keying - Minor glitches, Bill Tippett | 
| Previous by Thread: | [Orion] Re: [orion565] Deaf Orion, john, ke5c | 
| Next by Thread: | [Orion] Orion CW Keying - Minor glitches, Bill Tippett | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |