One of my two problems is, not surprisingly, operator error. My footswitch
was intermittent, so pin 3 of the aux jack works fine.
Still can't get VOX to work, trying a complete range of VOX sensitivity
settings.
Jim N7US
-----Original Message-----
From: orion-bounces@contesting.com [mailto:orion-bounces@contesting.com] On
Behalf Of Jim McDonald
Sent: Thursday, March 10, 2005 10:56 PM
To: orion@contesting.com
Subject: [Orion] Orion VOX & PTT problems
I connected my Heil Pro-Set OK, connecting the shield to pin 2 of the mic
connector and left the shell floating. It sounds OK on the monitor using
PTT connected to the CW jack on the from panel, with the appropriate menu
setting to use that jack as PTT on SSB. The MIC level and speech processor
seem to work fine.
However, I can't get the VOX to work. Yes, I have VOX turned on using the
front-panel button. I turned off antivox and am using headphones. I tried
varying the VOX sensitivity to no avail.
I can't get pin 3 on the DIN aux jack using the black phono jack on the
provided cable to work either, either as PTT on CW (menu set to MOX) or with
SSB. I am trying it with a footswitch that works OK when connected to the
front-panel CW jack, as I mentioned.
Am I missing something? Thanks.
Jim N7US
_______________________________________________
Orion mailing list
Orion@contesting.com http://lists.contesting.com/mailman/listinfo/orion
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|