RFI
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [RFI] RFI to intercom

from [Jim Brown] [Permanent Link][Original]
To: "RFI List" <rfi@contesting.com>
Subject: RE: [RFI] RFI to intercom
From: "Jim Brown" <jim@audiosystemsgroup.com>
Reply-to: Jim Brown <jim@audiosystemsgroup.com>
Date: Mon, 23 Aug 2004 10:19:36 -0500
List-post: <mailto:rfi@contesting.com> 
On Mon, 23 Aug 2004 08:11:10 -0500, EDWARDS, EDDIE J wrote:

> I think the right ferrite mtl
>to use is either 73 or 77; if wrong, someone on the list will certainly
>correct me!  :-)

For 20 meters, I would use 2-3 turns around #31 (best) or #43 (second best).  
My comments are based on a lot of measurements.

Jim Brown  K9YC



_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [RFI] RadCom (RSGB) Article on BPL, Ian White, G3SEK
Next by Date:  [RFI] Re: RFI to intercom, Skip Cameron
Previous by Thread:  RE: [RFI] RFI to intercom, EDWARDS, EDDIE J
Next by Thread:  [RFI] RadCom (RSGB) Article on BPL, Eric Rosenberg
Indexes:  [Date] [Thread] [Top] [All Lists]