Thanks for the caution Tim.
I should have been clearer. I meant to say I'd work on the low voltage,
digital logic; 5 volt (say) bypass capacitors on 5 volts, not X and Y caps
on motor leads.
Cortland
> [Original Message]
> From: Tim Groat <tcgroat@earthlink.net>
> To: <rfi@contesting.com>
> Date: 2/12/2005 10:35:01 AM
> Subject: [RFI] Re: Whirlpool Duet Washing Machine RFI update
>
> It's not certain the board has a "low voltage side". Motor drive circuits
> often have the low voltage control power tied to a primary side circuit.
> Since the appliance has no accessible conductors (I/O jacks, etc.)
> isolation isn't mandatory, and often is excluded to reduce cost.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|