RFI
[Top] [All Lists]

Re: [RFI] grounding your ham equipment

To: RFI <RFI@contesting.com>
Subject: Re: [RFI] grounding your ham equipment
From: "John K9UWA" <k9uwa@arrl.net>
Reply-to: k9uwa@arrl.net
Date: Sun, 30 Jul 2006 11:10:42 -0500
List-post: <mailto:rfi@contesting.com>
> That may be true. Maybe modern jargon defines this as a 
> perimeter ground now.
> 

The Polyphaser Book on Grounds refers to it as Perimeter 
Ground ... I have that as well and as stated in the Polyphaser
ground book an 8 foot ground rod each 16 feet along this 
perimeter ground line.

Polyphaser says to have one single run from the Permieter 
Ground to the tower ground system... and NOT to have any
ground rods on that run

John k9uwa
John Goller, K9UWA & Jean Goller, N9PXF 
Antique Radio Restorations
k9uwa@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>