RFI
[Top] [All Lists]

Re: [RFI] Ethernet RFI UPDATE

To: "'Andrew Ingraham'" <ingraham.ma.ultranet@rcn.com>,"'Rfi'" <rfi@contesting.com>
Subject: Re: [RFI] Ethernet RFI UPDATE
From: "WA3GIN in Alex. City, VA" <wa3gin@comcast.net>
Date: Mon, 2 Jul 2007 19:49:32 -0400
List-post: <mailto:rfi@contesting.com>
GO Figure...

This weekend I'll try more powerful extender boxes. These are rated at 1.5
Miles rather than 1500ft. I'm not thrilled about having  1/2lb of ferrite
hanging on the RJ11 cables to the units.

73,
dave
wa3gin@COMCAST.NET 

-----Original Message-----
From: rfi-bounces@contesting.com [mailto:rfi-bounces@contesting.com] On
Behalf Of Andrew Ingraham
Sent: Monday, July 02, 2007 6:54 PM
To: Rfi
Subject: Re: [RFI] Ethernet RFI UPDATE

> Now up to 1.2KW without issues.  Seems I was focused mostly on the barn
> where the radio gear is located and the issue appears to be at the house.
> Apparently, the house wiring is acting as an antenna and delivering enough
> of the 40m signal around to cause the Ethernet extender box to fault.

Even at 5W into a dummy load, a quarter of a mile away?  Wow.

Andy


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>