Hi Kirk
I found your photo of the swr/field strength meter interesting. I have one
very simular to yours. it looks like you are connected to the top port where
there use to be a small screw in antenna for field strength. I can not see
clearly how you have the wires connected . Is one connected to the screw port
and the other to ground on the top of your meter?
john w9zy
K4RO Kirk Pickering <k4ro@k4ro.net> wrote:
On Tue, Jan 29, 2008 at 07:54:47AM +0000, Ian White GM3SEK wrote:
> A clamp-on RF current meter will SHOW you the answers to all of those
> questions. It really is like taking the blinders off - suddenly you can
> SEE what's happening!
I can testify to Ian's comments. I still have a lot to learn
about WHY I have so many common mode problems, but it sure is
helpful to SEE where the biggest problems actually are. I built
this ridiculously simple sniffer in about 2 minutes from parts
on hand. Perhaps your junk box already has what you need.
http://www.k4ro.net/k4ro/current_meter/MVC-004F.JPG
73
-Kirk K4RO
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|
