Rick,
Beads do NOTHING at 40-160M -- they are VHF suppressors. Study my
RFI tutorial for specific suppression ideas.
http://audiosystemsgroup.com/RFI-Ham.pdf
73,
Jim K9YC
On Sun, 12 Oct 2008 10:14:23 -0700 (PDT), rick darwicki wrote:
>Hi all,
>I have a Sony TV with a DirecTV box and DVD player connected with
RWY cables to the Video Inputs. Beads and snap-ons on everything
including the short speaker wires. On the low bands 40-160 with
the DirecTV box and DVD grounded together the picture tilts with
keying about 20 degrees and gets into the audio.
>If I disconnect the ground between the boxes the interference
reduces quite a bit. Now the interesting part. If I remove the RWY
cables from the DVD to the TV the interference INCREASES. However,
if I just UNPLUG the cables right at the DVD box, there is on
audio interference and the screen barely jumps at all.
>Any ideas?
>Thanks
>
>.ú:*´¨`*.ú: RICK, N6PE .ú:*´¨`*:ú.
>_______________________________________________
>RFI mailing list
>RFI@contesting.com
>http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|