You added a good point.
The issue from variable speed motor controls is pretty serious.
I live in an apartment that upgraded the elevator system about 2yrs
ago.
Prior my noise level was s0 or s1
Noise level now is s9 all bands! for a 30ft radius /min
Discovered the noise source is a Maganek600 motor controller. Manuf. told
me, they don't need FCC approvals because it has a Canadian rating
They also told me they never had any previous complaints (right)
You all make a good point, stuff like this should never be allowed
73,
N2EHG
Myles
On Apr 9, 2010, at 9:14 PM, Jim Brown wrote:
> On Sat, 10 Apr 2010 00:58:56 +0000, Missouri Guy wrote:
>
>> Since the BPL issue is pretty much dead, perhaps a new and
>> tougher RFI mission is in order?
>
> More than two years ago, I told ARRL that the trash from various switching
> power supplies and variable speed motor control was at least as big an issue
> as BPL ever was. So far, I haven't seen anything that looks like a serious
> initiative to tackle it.
>
> 73,
>
> Jim Brown K9YC
>
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|