[Top] [All Lists]

Re: [RFI] Surge suppressor distance from panel

To: "RFI List" <rfi@contesting.com>
Subject: Re: [RFI] Surge suppressor distance from panel
From: "Cortland Richmond" <ka5s@earthlink.net>
Reply-to: ka5s@earthlink.net
Date: Sun, 11 Apr 2010 12:10:35 -0400
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
My guess is, current limiting. Might catch fire or worse if the source is
too stiff.  Is it UL (or other safety lab) marked? Sounds like a recall
waiting to happen.


> [Original Message]
> From: Pete Smith <n4zr@contesting.com>
> To: RFI List <rfi@contesting.com>
> Date: 4/11/2010 11:19:45 AM
> Subject: [RFI] Surge suppressor distance from panel
> I just ran across something I'd never seen before in the specs for a 
> surge suppressor (brand not important).  It said "DO NOT install this 
> device if there is not at least 10 meters (30 feet) or more of wire 
> between the electrical outlet and electrical service panel."  Why?
> -- 
> 73, Pete N4ZR

RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>