rick darwicki wrote:
> Just finished installing a Sharp Aquos LC-52LE920UN TV and DirecTV HD DVR.
> Disconnected the old box and Sony 32". The Sony took tons of ferrite on all
> the AV cables, power cords etc to get rid of my signal on most bands, there
> was still some slight jumping on a few band.
> I installed the new system with just the ferrite I had on the two leads to
> the dish. Nothing on any of the cables to start.
> Ran a test with the beam pointed at the dish and max (700w) power 1.8 to 54
> NOT A TRACE OF RFI ANYWHERE - and the TV does not radiate to the PRO III.
> The old Sony had a plastic case, the Sharp has a metal screen/chassis.
> Life is good !!!
Many folk I know have put Sharp down for any reason(s).
Being a service technician for most of 25 years now retired, I can certify
to their innovation and dedication to consumer products.
Not to sound bias, but they too, have also manufactured "low-end" stuff.
RFI mailing list