RFI
[Top] [All Lists]

Re: [RFI] Interference from AC units

To: <rfi@contesting.com>
Subject: Re: [RFI] Interference from AC units
From: "Larry Parker" <ve3edy@cogeco.ca>
Date: Mon, 29 Aug 2011 07:44:06 -0400
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Most if not all High Efficiency AC units have a variable speed induction 
motor in them,
The ac voltage fed to the motor is converted to DC inside the motor housing
by an ac-dc  control module which in most cases by a binary setting controls 
the speed of the now dc motor.
This RF hash was an extreme annoyance at the new QTH we purchased.
I shielded all the motor wires as best I could and installed snap-on RF 
beads  this eliminated most if not all the
hash generated by these new varaible speed  motors.
Calling the manufactureTappan produced no results and speaking with the 
installers, the same , I don't know what you are talking about or never 
heard of that before.
I am satisfied with my efforts to reduce the RF generated by these motors.

My next big headache is the new undercounter puck lights that have a 20 khz 
transformer converting 120vac to 12vac.
Seems everbody in the neighborhood where I live has at least one set of 
these RF emitting lighting systems installed.
RFI starts at 20khz and goes up passed 30mhz.


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>