[RFI] Noise from Switcher Solved

["Mike Wetzel" <w9re@comcast.net>]

Turned out to be a wall wart switching p/s that by mistake was used on a
Linksys 20 port switch.  The p/s that was used was a 3 V 1 A and it should
have been a 12 V 1 A.  The p/s was hot and when replaced all noise was gone.
The switch was after the cable modem and router.  

 

Thanks for all the help,

 

Mike W9RE

 

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi