Pete - I had similar problems until I purchased shielded USB cables with
the small ferrites already molded in. The ones I have are silver and look
braided under a clear insulation. They are noticeably thicker than a
regular cable.
Those these don't LOOK the same as mine, I'd trust the Tripp-Lite brand to
be properly shielded, I do believe.
*https://www.amazon.com/Tripp-Lite-Hi-Speed-Ferrite-U023-006/dp/B003MQ29B2
<https://www.amazon.com/Tripp-Lite-Hi-Speed-Ferrite-U023-006/dp/B003MQ29B2>*
This is more what mine look like - I don't know that it's necessary to be
able to "see" the shielding or not! *:-)*
*http://www.ebay.com/itm/1-5M-USB2-0-A-Male-to-B-Male-M-M-Extension-Shield-Cable-Blue-for-Printer-Scanner-/321535280583?hash=item4adcff05c7:g:n2oAAOSw~AVYuMEa
<http://www.ebay.com/itm/1-5M-USB2-0-A-Male-to-B-Male-M-M-Extension-Shield-Cable-Blue-for-Printer-Scanner-/321535280583?hash=item4adcff05c7:g:n2oAAOSw~AVYuMEa>*
Anyhow, maybe that'll help ya out.
Be good!
73
Matt
AK4MK
On Mon, Mar 13, 2017 at 7:31 AM, Pete Smith N4ZR <n4zr@comcast.net> wrote:
> My shack computer has 6 different USB devices attached. When I disconnect
> all but the keyboard, it cuts the background noise level on 160M by a
> whopping 25 dB, from S9+18 down to S8 (as monitored by HDSDR and my QS1R,
> calibrated by an Elecraft XG3).
>
> What is to be done? It doesn't seemvery feasible to wind each usb cable
> on a small type 31 toroid and get enough attenuation . Available snap-ons
> all seem to roll off dramatically below 25 MHz. Can a common mode filter be
> built using discrete components that will have decent attenuation at 160 M?
> Or, maybe, is such a filter available commercially? I have Googled and
> reviewed K9YC's tutorial but found nothing directly apposite.
>
> Thanks for any ideas!
>
>
> --
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|