RFI
[Top] [All Lists]

Re: [RFI] A "new" RFI

To: "Ken, WA2LBI" <wa2lbi@gmail.com>, Ken Gordon <kgordon2006@frontier.com>, "RFI@contesting.com" <RFI@contesting.com>
Subject: Re: [RFI] A "new" RFI
From: JW via RFI <rfi@contesting.com>
Reply-to: JW <jwin95@yahoo.com>
Date: Tue, 2 May 2017 11:57:24 +0000 (UTC)
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Good point Ken/LBI.

Ken W7EKB, what time did this start last night?


And, did it cut off this morning?

Jim WB5WPA



      From: "Ken, WA2LBI" <wa2lbi@gmail.com>
 To: Ken Gordon <kgordon2006@frontier.com>; RFI@contesting.com 
 Sent: Tuesday, May 2, 2017 3:35 AM
 Subject: Re: [RFI] A "new" RFI
   

    
Sounds like a defective starter in a street lamp.  
KenWA2LBI
Sent from my S5

-------- Original message --------
From: "Kenneth G. Gordon" <kgordon2006@frontier.com> 
Date: 5/2/17  01:21  (GMT-05:00) 
To: RFI@contesting.com 
Subject: [RFI] A "new" RFI 

So....I am sitting in front of the rig this evening, minding my own business, 
trying to do a little 
operating on 80, and BAM!!!, suddenly I have a +40 dB over S-9 noise level, 
sounding like 
an AC arc. 

Every once in a while, it suddenly stops completely for a second or two, then 
starts right 
back up again at the same level. Effecting all bands up through 20 meters so 
far. The "off" 
time doesn't even last long enough for the S meter on my FT-890 to drift down 
to normal.

Rats!!!!! :-(

It is too late tonight to do anything about it, but I'll have to start tracking 
it tomorrow...if it is 
still there.

I did turn off all the breakers in our home and it didn't go away.

I am NOT happy!!!

Ken W7EKB
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


   
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>