Hi Chuck,
I have had the exact same faucet for 4 years. Same problem here. (I love the
touch tap btw). The worst band was 40m, but I would activate the unit on most
bands. If you can copy CW, you could copy my transmission by listening to the
tap turn on-and of with my keying.
Tried everything...ferrites on all leads to the device etc. 40 and 80m Yagi at
100' with CM chokes on all lines. No solution found....except...just make sure
you manually turn the faucet off before you operate. It drove my wife nuts, but
she learned to just get up and turn the tap off. It was really creepy at first
to see the tap turning on and off magically by itself. Actually scared the kids
at first but they got used to it..."oh, Dad is on the radio again!"
I have since moved my station to a remote location so that sure solved my
problem.
De steve VE6WZ
>From Babcocks iPhone
> On Sep 22, 2017, at 7:22 PM, Chuck Gooden <Chuck.Gooden@comcast.net> wrote:
>
> Hope some one can assist me with this RFI problem.
>
> We have a kitchen faucet made by Delta (Model 9192T). The faucet will turn
> on when you touch it and turn off when you touch it again. It actually
> worked pretty good. The control module and solenoid is powered by 6 AA
> batteries.
>
> Unfortunately, when I use my transmitter the faucet will toggle the water off
> and on.
>
> I have contacted Delta and they said there isn't a solution, other than
> disabling the touch feature (problem?). The installer did not give me much
> room to work and it will not be easy to disable the touch feature and we like
> this feature.
>
> Any one have any other suggestions?
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|