I don’t have much RFI in my shack and it seems like everything is working
pretty well.
The one thing I have left to fix is that my DC power system which has a power
supply that charges the backup battery, the battery powers radios and other
stuff and has a monitoring system with a high current shunt and a volt meter.
When I transit on 40 and 80 something gets into the battery monitor and it goes
crazy, flashes the display, etc. When I stop the transmission it goes back to
normal so it’s not damaging the voltmeter.
What I want to do is to bypass or filter or someway get rid of the RFI that’s
getting into the current reading shunt and or voltmeter of my battery
monitoring system.
If you have you any insight I would appreciate it.
Thank you,
Mike
NA6MB
Sent from my iPad
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|