Poor design is almost always the problem when it’s the only thing with a
problem.
I have old co2 detectors that beeped.
Replaced with quality brand an now all is ok.
Mike
NA6MB
Sent from my iPad
> On Jul 28, 2018, at 9:56 AM, <john@kk9a.com> <john@kk9a.com> wrote:
>
> The original poster did not say if it is a wired, multiple wired linked
> detectors or a battery unit but I am guessing that it is not a battery type.
> Trying a different brand may be interesting.
>
> John KK9A
>
>
> Jim Brown jim at audiosystemsgroup.com
> Sat Jul 28 12:03:04 EDT 2018
>
>> On 7/28/2018 6:43 AM, john at kk9a.com wrote:
>> It is likely that the majority of the problem is feedline radiation.
>
> While it is likely a PART of the problem, the greatest part of the
> problem is the wiring issues and poor design of the detector.
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|