It could be possible that you only need one connection from
that plug. If you are running FSK, you only need PTT. If that's
the case then you could hard wire it or wire-wrap to the appropriate
pin(s).
73, Don AA5AU
----- Original Message -----
From: "The Tolberts" <jtolbert@gremlan.org>
To: "Jacoby, M G" <m.g.jacoby@lmco.com>; "'John'" <vk4cej@hamsnet.net>;
<rtty@contesting.com>
Sent: Wednesday, September 26, 2001 5:10 PM
Subject: Re: [RTTY] PK-232's
> Buy some IC sockets at Radio Shack and trim to fit.....
>
> 73 Jamie WW3S
>
> ----- Original Message -----
> From: "Jacoby, M G" <m.g.jacoby@lmco.com>
> To: "'John'" <vk4cej@hamsnet.net>; <rtty@contesting.com>
> Sent: Wednesday, September 26, 2001 10:04 AM
> Subject: RE: [RTTY] PK-232's
>
>
> > John,
> > Those connectors are manufactured by ITW Pancon, their Mas-Con series of
> > .100" IDC connectors. I was able to obtain a sample quantity of 5
> connectors
> > and 5 snap-on covers from their web site. Some distributors stock them,
> too
> > -- e.g. Newark in packs of 500. http://www.itwpancon.com
> >
> > They come in different versions for wire sizes AWG 28 through 24. For AWG
> 24
> > wire, the part numbers are CE100F24-5 and EC100F-5 for the "end" connector
> > and snap-on cover. You may also want the hand tool to punch down the
> > insulated wire into the connector -- I bought one from Newark, p/n
> MRT-100F.
> >
> > I haven't tried it yet, but I am guessing that other .100 headers would
> mate
> > OK to the PK-232 and would be less of a hassle to work with. I bought a
> bag
> > of the AMPMODU single row housings and contacts from Digikey to try out.
> >
> > 73, Mike N3MA
> > m.g.jacoby@lmco.com
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
|