I have the same Belkin working OK with XP though I haven't tried it for FSK
yet.
I got the Byte Runner 4-port PCI serial card working OK with no IRQ problem.
Jim N7US
----- Original Message -----
From: "Wes Cosand" <wz7i@arrl.net>
To: <rtty@contesting.com>
Sent: Sunday, December 07, 2003 6:10 AM
Subject: [RTTY] Re:AA5AU Score & USB/serial ports
>I installed a Keyspan USB-to-Serial
>adapter (on COM4) for radio control. I tried to install my Belkin F5U103
>USB-to-Serial adapter (it installed OK as COM5), but when I went to
>activate it, I got the blue XP screen of death. I tried several times
>but it never worked.
So if the Belkin unit won't work with Windows XP and the other units won't
pass Baudot code, how do we go forward?
I spent at least five hours yesterday struggling to get only a couple of
the ports of a four port serial board working because of the shortage of
IRQ's. I could easily use two or three additional ports.
With new computers with USB mice, keyboards and printers are the IRQ's that
would otherwise be used for these in a range that is available to serial
port boards? Do people really have success with shared IRQ's for serial
ports?
Wes, WZ7I
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|