Re: [RTTY] Dual Receive with WriteLog/MMTTY

[Jerry Flanders <jeflanders@comcast.net>]

I have two sound cards in each of my ham computers and having two cards 
lets me run two instances of MMTTY/Rttyrite fine. My two sound cards show 
up as -1 and 1 in MMTTY's Options - setup configurator. A Radio Shack 
Y-connector lets me feed both cards the same audio. The cards are cheapie 
PCI COMPusa clearout $10 specials.

I have done just as you mentioned, using different filter configurations in 
each.

By the way, you can start up a second instance of Rttyrite independently, 
without declaring a second radio to WL.

Jerry W4UK

At 23:23 1/6/04, J. Edward (Ed) Muns wrote:
> Has anyone set up dual receive (two decoders on one signal) in WriteLog
> using two MMTTY rttyrite windows instead of a TNC and MMTTY?  The motivation
> for doing so is to have MMTTY windows with different profiles active in
> parallel, e.g., normal, flutter and multi-path.  I've been trying to get
> this to work and can't get the signal into more than one RTTY Control window
> at a time.
>
> Thanks,
> Ed - W0YK


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty