[Top] [All Lists]

Re: [RTTY] fluttered signals

To: <rtty@contesting.com>
Subject: Re: [RTTY] fluttered signals
From: "Vladimir V. Sidorov" <eu1sa@belsonet.net>
Date: Tue, 20 Apr 2004 05:33:52 +0100
List-post: <mailto:rtty@contesting.com>
You might try like this:

BPF "On" with Tap 256 and FW 100 Hz

LMS "On" with 64, 24, 0.01, 0.9998, Agc (to activate the LMS setup
right-click on the "Not." button, you'll see it turns to LMS, them go to
"SetUp MTTY).

With setups like this my MFJ 1278B DSP is topped witn an inch of dust.

Good luck and 73,

Vladimir EU1SA

> I second Ian's request, following my last email, that I'd like to know
> the really computer geeky guys out there that fully understand DSP and the
> settings in MMTTY what suggestions are there to change.
> I've searched the web and the only thing I came across was the really old
> (now only on google cache) "review" done on rttyinfo.net that suggested
> changing the tap to 96 and such.
> What say we all get together and figure out whats the best way to get this
> program configured and running.
> Charlie
> Anyone care to share their favorite MMTTY setups (including the
> details)? I'm experimenting with dual instances of MMTTY, but can't see
> any really consistent differences.
> Also, a friend has a shiny PK-232 that has been sitting unused for
> years... if I made him an offer and did the RTTY conversions, would it
> be worth the money and effort?
> --
> 73 from Ian G3SEK

RTTY mailing list

<Prev in Thread] Current Thread [Next in Thread>