Pete
I'm not sure about output being only 10W when drive is reduced so ALC
doesn't indicate, as I haven't used my 570 for sometime. However, I can
help you with your question on FSK. The 570 does do FSK. The relevant menu
adjustments are:
29........FSK shift (170Hz default)
30........"ON" (space) or "OFF" (mark) on key down
31........High/Low tone select
Connections via ACC2
Pin Function
1 N/C
2 FSK
3 A/F from RX
4 GND (pin 3 shield)
5 Squelch
6 S-meter output
7 N/C
8 Chassis GND
9 PTT (mic i/p muted)
10 N/C
11 Mic audio i/p
12 GND (shield for pin 11)
13 PTT (mic i/p not muted)
Good luck.
73 Bob, 5B4AGN
----- Original Message -----
From: "peter jackson" <peter.jackson17@ntlworld.com>
To: <rtty@contesting.com>
Sent: Wednesday, April 27, 2005 8:14 AM
Subject: [RTTY] TS570 with afsk
> Hi, two of our club members who are new to rtty find with their TS570 if
> they turn down the drive from the sound card so the ALC meter dosen't read
> the power out is only about 10watts. Is this normal. Also does the 570
> support FSK? Hope someone can help, 73 Pete G3KNU
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|