ORIGINAL MESSAGE:
At 09:21 PM 2/21/2006, Richard-WA6ES wrote:
>Hello to all
> Maybe someone out there can help me in this matter. Am I correct
> to think that in connecting my 746pro to my PK 232MBX, I only need
> to connect the ACC1 port to the PK232 and not the mic to it.
> Basically I am asking if I have to connect my mic also. I would
> hate to have to switch between my mic and 232. Can anyone help or
> aim me in the right direction. I am now using AFSK and want to move up to FSK.
>
>Thanks
>Rick Silva WA6ES
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you change to FSK, you need no mike connection at all for
transmit. The PK232MBX will have a RTTY output which connects to the
appropriate connector on the '746, but it's just an on-off type
keying signal. No audio content at all.
You still have to run the audio from your speaker or line out to the
'MBX for receive, just like before.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|