Andrei,
By default the Icom's set the baud rate for CIV to auto. If you turn on the
radio and the first program you start has a baud rate set at 9600bps, then
exit that program and enter another program with the baud rate set at say,
4800bps or 19.2kbps, the radio will not reset itself to the new program. I
had the same problem with mine, whereby Writelog was set for 9600bps, but
AcLog was set for 19.2kbps. Get into one and it essentially "set" the radio
to that baud rate and the only way to reset it was to power off the radio
and power it back on.
The fix for the entire problem was to set the radio at a static rate,
9600bps should be fine, this is set in the menu on the radio. Then go into
all of your programs and set them to statically use the same baud rate,
9600pbs. Removing the autobaud setting on the radio fixed my problem. No
more confusion. To test, power off the radio while Writelog is open and
then power it back on. See if it finds the frequency and mode then. If so,
it's a baud rate mismatch.
Charlie
KI5XP
> Date: Sun, 26 Mar 2006 20:15:24 -0800 (PST)
> From: Andrei Nevis <v49a@yahoo.com>
> Subject: [RTTY] WRITELOG - NEED HELP!
> To: writelog@contesting.com, RTTY@contesting.com
> Message-ID: <20060327041524.59094.qmail@web52615.mail.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hello group:
> I need Help.
> I am using WL and MMTTY for RTTY. It did work FB for awhile.
> Recently, I played with some programms and, suddenly when I
> came back to Writelog, I saw that it DOES NOT READ the
> Frequency, Mode - just shows NO Rig.
> RTTY transmitting is OK, CW is also OK.
> I can put manually the Freq and FSK Mode but this is it.
> I am using ICOM-PRO-3 with CI-V Interface.
> I tried another program, like HB9DRV DELUXE - IT Does read
> the frequency, no problem.
> I did CI-V Test by DF4OR - it works FB, read the frequency and Mode.
> MMTTY also - Transmit RTTY but NO Frequency reading.
> I checked every ICOM Radio in Setup with All Baud Rates -
> nothing whatsoever.
> I reinstalled WL - did not help.
> I connect Kenwood instead - works Super right away.
> Please help!
> Thank you
> 73's Andrei EW1AR-NP3D
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|