RTTY
[Top] [All Lists]

Re: [RTTY] fsk?

To: rtty@contesting.com
Subject: Re: [RTTY] fsk?
From: Tim <tim.n9puz@gmail.com>
Date: Fri, 05 Jan 2007 19:35:16 -0600
List-post: <mailto:rtty@contesting.com>
Beau and I live in the same town and Wednesday we spent about an hour 
on the phone and on 20 Meters trying to sort out his problem. We were 
unsuccessful.

I'm not a RTTY expert. I've been using MMTTY sucessfully for a few 
months and Wednesday around lunch time I made a couple of contacts on 
40M to verify my station was working properly in preparation for helping.

Beau tried both normal and reverse modes. Each time the signal 
"sounded" like RTTY. One way there were no characters printed at all. 
The other way random characters and general garbage text printed. He 
said he could read my transmissions just fine.

I'd sure like to help figure this out. I was fortunate in that the 
first time I tried RTTY everything worked.

Tim, N9PUZ

John Holmes wrote:
> Hi Beau.
> Before you make other changes, be sure to try the "inverted" mode. I just
> had the same problem with a TS-570DG using MMTTY...the transmit was
> "inverted". Hopefully, this should do the trick. Print you this weekend.
> 73,
> John W9ILY
> 
> 
> 
>> Date: Thu, 04 Jan 2007 21:58:44 -0600
> From: beau <n9mfk@insightbb.com>
> Subject: [RTTY] fsk?
> To: rtty@contesting.com
> Message-ID: <459DCCF4.8040709@insightbb.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Hi all I am new to to group
> I am trying to use a ts570gs in fsk mode using a rig baster pro an mixw
> it sounds ok but no one can decode my transmit
> i have read a few post my question is for the fsk keying to work correct
> do i need to set the parity on my fsk com port to 5 n an 1an are there
> any other settings i need to set
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>